Step 1: Preparation
Make sure the wheels are cool to the touch before you begin. Avoid working in direct sunlight or on hot surfaces, as this can cause the cleaner to dry too quickly.
Step 2: Pre-Rinse
Rinse the wheels with clean water to remove loose dirt and brake dust. This gives the cleaner a clear surface to work on and improves results.
Step 3: Apply the Cleaner
Spray Red Wheel Cleaner generously onto the wheel surface, covering spokes, barrels, and tight areas.
Step 4: Watch It Work
Allow the product to dwell for a few minutes. As it reacts with iron particles and contaminants, it will change colour to a deep purple, showing you it’s breaking down the dirt.
Step 5: Rinse Thoroughly
Use a strong stream of water or a pressure washer to rinse away the cleaner and dissolved contaminants. Ensure no product is left behind.
Result: Wheels that look fresh, bright, and free from stubborn brake dust.
Pro Tip: For heavily soiled wheels, agitate the cleaner with a soft wheel brush before rinsing for the best finish.
Can be used on paint too as a fallout remover!